How to Upgrade Firmware and Factory Default Devices in BioStar 1

This article shows how to upgrade devices firmware and factory default devices in BioStar 1.

Firmware Upgrade

You can download the latest firmware updates from the Suprema website at http://www.supremainc.com/eng. On the web page, go to Support > Customer Downloads to see the list of the latest firmware updates. 

• Go to Option > Device > Firmware Upgrade as shown below.

• Select device type.
• Select device which you are upgrading.

• Click Select firmware and choose the firmware file
• Click Upgrade
• The reader will reboot once the firmware upgrade is completed.

Factory Default

Factory Default will push the reader in DHCP state and lose its current IP. Internal memory of the Reader will also be defaulted. Perform the following steps to achieve the process.

• Go to Option > Device > Factory Default as shown below.

• Select device type.
• Select device to be Defaulted.
• Click Initialize.
• Reader will reboot once the process is completed.